Illustrated Index - Honda CR-V 1997 Service Manual

Illustrated Index
CAUTION: The system is under high pressure when the
engine is hot. To avoid danger of releasing scalding engine
coolant, remove the cap only when the engine is cool.
Total Cooling System Capacity [including 0.6 I 10.63 US
qt, 0.53 Imp qt) for heater and reservoir]:
AfT: 5.9 I 16.2 US qt, 5.2 Imp
qt)
M/T: 6.0 I 16.3 US
qt,
5.3
Imp qt)
6x1.0mm
9.8 N·m (1.0 kgf·m.
7.2
UPPER BRACKET
AND I
6x1.0mm
7 N·m 10.7 kgf·m, 5 Ibf.ftl
CONDENSER
FAN/SHROUD
PLUG
O-RING
If any engine coolant spills on the painted portions of the
body, rinse it off immediately.
Check all cooling system hoses for damage, leaks or
deterioration and replace if necessary.
Check all hose clamps and retighten if necessary.
RADIATOR
Engine coolant refilling and bleeding,
page 10-5
Leak test, page 10-7
Inspect soldered joints and
seams for leaks.
Blowout dirt from between
core fins with compressed air.
If insects, etc., are clogging
radiator, wash them off with RADIATOR CAP
low pressure water. Pressure test, page 10-7
[
.~:::::"J-_~
____
ATFCOOLER
\, HOSE
Refer to section 14
when installing.
LOWER
~i--'-::'-<::::---
CUSHION
r
RADIATOR
FAN
RAlllAlrOR FAN
FAN MOTOR
SHROUD
6x1,Omm
7 N·m (0.7 kg!·m, 5 Ibf.ftl
10-2