VTrak 15200 User Manual
VTrak Setup with the CLU
Set up with the CLU consists of the following steps:
1.
CLU Connection (below)
2.
iSCSI Configuration (page 51)
3.
Create a Logical Drive
•
Automatically (page 57)
•
Manually (page 58)
4.
Exit the CLU (page 60)
CLU Connection
Before you begin, be sure the null modem cable is connected between the Host
PC and VTrak, and that both machines are booted and running.
1.
Start your PC's terminal emulation program.
•
If you worked though the Setup procedure above using
WebPAM PRO, your VTrak setup is complete. There is no
need to repeat the Setup with the CLU.
•
See Chapter 5 on page 123for a full explanation of the CLU
functions.
Notes
50