Table of Contents
Advertisement
VTrak 15200 User Manual
-------------------------------------------------------------------------
Modify iSCSI SLP Port 1 Settings
1. SA
2. DHCP
3. DA
4. DA IP Address
R. Return to Previous Menu
Please enter your menu choice>
3.
Review the settings for this iSCSI Port. If you want to change one, type its
number and press Enter.
4.
Enter the new value as directed and press Enter.
You return to the iSCSI Port Network Settings menu and the new value displays
above it.
When you exit the iSCSI Port Settings menu, the CLU prompts:
Save iSCSI SLP Port new settings(y/n)?>
Press Y and Enter to save or N and Enter to cancel.
SLP Port Parameters
Following is a brief explanation of each SLP Port parameter and its meaning.
•
The port ID number (0 or 1)
•
SLP status. Enables the Service Location Protocol
•
SA status. Enables support for Service Agents
•
Get DA through DHCP status. Obtains Directory Agent service from the
DHCP server.
•
Use DA. Using an external Directory Agent support
CHAP
Challenge Handshake Authentication Protocol (CHAP). An authentication agent
(typically a network server) sends the client program a random value and an ID
value. Both the sender and peer share a predefined secret. The peer
concatenates the random value, the ID and the secret and calculates a one-way
hash value. The hash value is sent to the authenticator, which in turn builds that
same string on its side, calculates the sum and compares the result with the
value received from the peer. If the values match, the peer is authenticated.
1.
From the iSCSI Management menu, press 1 and Enter to access iSCSI
Node Parameters.
2.
Press 12 and Enter to access CHAP Authentication.
Enable CHAP(y/n)?>y
54
Advertisement
Table of Contents
