Install Webpam Pro - Promise Technology VTRAK 15200 User Manual

VTrak 15200 User Manual

Install WebPAM PRO

Windows
Follow these steps to install WebPAM PRO on your Windows-based PC or
Server.
1. Boot the PC/server and launch Windows.
If the computer is already running, exit all programs.
2. Insert the software CD into your CD-ROM drive.
3. Double-click on the Install CD's icon to open it.
4. Double-click on the Installer icon to launch it (right).
The first WebPAM PRO installation dialog box appears, as
shown on the next page.
Linux
Follow these steps to install WebPAM PRO on your Linux-based PC or Server.
1. Boot the PC/server and launch the Linux GUI.
If the computer is already running, exit all programs.
2. Insert the software CD into your CD-ROM drive.
3. In the CD frame, double-click on the webpam...bin icon to
begin installation (right).
4. When the Run or Display? dialog box appears, click Run in
Terminal.
After several moments, the Terminal frame closes and the first WebPAM
PRO installation dialog box appears, as shown on the next page.
28