Table of Contents
Advertisement
VTrak 15200 User Manual
How can I be sure everything is working OK on the VTrak?
VTrak has several LEDs on the front to monitor the status of power, field
replaceable units (FRUs) and logical drives. When these are green, VTrak is
functioning normally.
What happens if a logical drive goes critical?
On the front of VTrak, the logical drive LED turns amber and an audible
alarm sounds. This condition is described in Chapter 4 of the VTrak User
Manual on the Software CD.
Can VTrak run using just one power supply?
Yes, it is possible to run VTrak on a single power supply. There are two
power supplies so that VTrak will continue running if one of the power supply
fails. But deliberately leaving one power supply off negates this advantage.
Always switch on both power supplies.
224
Advertisement
Table of Contents
