Table of Contents
Advertisement
You return to the iSCSI Port Network Settings menu and the new value
displays above it.
When you exit the iSCSI Port Network Settings menu, the CLU prompts:
Save iSCSI port network parameters(y/n)?>
Press Y and Enter to save or N and Enter to cancel.
SLP Port
Service Location Protocol (SLP) is a standard used to discover services over the
Internet. It includes Service Agents (SA) the advertise services and a Directory
Agent (DA) that gathers and organizes the data for queries.
1.
Press 3 and Enter to access iSCSI SLP Port settings.
iSCSI SLP Port Settings
1. Port 1
2. Port 2
R. Return to Previous Menu
Please enter your menu choice>1
2.
Press 1 or 2 to select an iSCSI SLP Port then press Enter.
iSCSI SLP Port 1 Settings:
SA: disabled
Get DA Through DHCP: no
Use DA: no
DA IP Address: 0.0.0.0
-------------------------------------------------------------------------
Modify iSCSI SLP Port 1 Settings
1. SA
2. DHCP
3. DA
4. DA IP Address
R. Return to Previous Menu
Please enter your menu choice>
3.
Review the settings for this iSCSI Port. If you want to change one, type its
number and press Enter.
4.
Enter the new value as directed and press Enter.
You return to the iSCSI Port Network Settings menu and the new value displays
above it.
When you exit the iSCSI Port Settings menu, the CLU prompts:
Save iSCSI SLP Port new settings(y/n)?>
Chapter 5: Management with the CLU
167
Advertisement
Table of Contents
