Table of Contents
Advertisement
VTrak 15200 User Manual
Migrate Logical Drive
Use this feature to change the RAID mode (level) or a logical drive or to add more
physical drives.
1.
Type 2 and Enter to access Migrate Logical Drive.
2.
Type the ID number for the logical drive and press Enter.
*******Physical Drives Selection*******
Id
----------------------------------------
7
8
9
Enter Physical Drive ids and/or id ranges
separated by commas. For example: 1,5,8-15.
Press R to continue after you have finished
selecting Physical Drives.
Your input?>7,9
3.
Type the ID number(s) for the disk drive(s) you want to add and press Enter.
*******Physical Drives Selection*******
Id
----------------------------------------
*7
8
*9
2 Physical Drives have been selected.
Enter Physical Drive ids and/or id ranges
separated by commas. For example: 1,5,8-15.
Press R to continue after you have finished
selecting Physical Drives.
Your input?>r
4.
Type R and Enter when you are finished adding disk drives.
Destination RAID mode selection for LD migration
RAID Mode Options:
0 - RAID 0 (Striping)
1 - RAID 1 (Mirroring)
3 - RAID 3 (Parity)
5 - RAID 5 (Parity Distributed)
10 - RAID 10 (Striping/Mirroring)
50 - RAID 50
Please enter RAID mode(0,1,3,5)>5
Name
ST3160023AS
ST3160023AS
ST3160023AS
Name
ST3160023AS159 GB
ST3160023AS159 GB
ST3160023AS159 GB
154
Capacity
159 GB
159 GB
159 GB
Capacity
Advertisement
Table of Contents
Need help?
Do you have a question about the VTRAK 15200 and is the answer not in the manual?
Questions and answers