Manual Rebuild - Promise Technology VTRAK 15200 User Manual

5. Type the new RAID level you want for the logical drive.
A list of possible levels appears in parentheses beside the prompt.
Migrate Logical Drive 1 now(y/n)?>y
6. Press Y and Enter to confirm logical drive migration.
Press N and Enter to cancel the operation.
The Screen returns to the Modify Logical Drive Priorities menu.
If the Maintenance Activity Monitor is enabled, you can watch the Migration
progress on your monitor.

Manual Rebuild

Use this feature to rebuild a logical drive manually. Your system must meet the
following conditions:
• Auto Rebuilding Option is disabled. See page 151.
• The logical drive is Critical
• A free disk drive of equal or larger size is available
With the above conditions met, proceed with the manal rebuild.
1. Press 3 and Enter to rebuild a logical drive manually.
2. Choose the ID number of the logical drive you want to rebuild and press
Enter.
A list of available, qualified disk drive appears.
Available free Physical Drive(s):
1
2
7
Choose the free Physical Drive for rebuilding>2
Rebuild Logical Drive 1 on Physical Drive 2 now(y/n)?>y
3. Choose the ID number of a free physical drive to rebuild your logical drive
and press Enter.
Press Y and Enter to confirm.
The Screen returns to the Modify Logical Drive Priorities menu.
If the Maintenance Activity Monitor is enabled, you can watch the Rebuild
progress on your monitor.
Chapter 5: Management with the CLU
155