Table of Contents
Advertisement
VTrak 15200 User Manual
4.
Pull the cooling unit out of the VTrak enclosure.
Lift the battery out
of the bracket
5.
Detach the connector and lift the battery out of the bracket (above).
6.
Place a new battery into the bracket and attach the connector.
7.
Carefully slide the cooling unit into the enclosure.
8.
Gently press the handle in and upward until it locks (above).
9.
Verify that the battery LED is green.
This completes the battery replacement procedure.
186
Detach the
connector
Advertisement
Table of Contents
Need help?
Do you have a question about the VTRAK 15200 and is the answer not in the manual?