Table of Contents
Advertisement
Rebuild a Logical Drive
When a disk drive fails and you manually replace it with a new one, you must
rebuild the new drive to restore data redundancy. Normally, the rebuild process
begins automatically. You can also perform a rebuild manually.
For the Rebuild to be successful:
•
You must correctly identify the disk drive that needs rebuilding
•
Logical Drive status must be Functional
You must have Maintenance Rights to perform this function.
Follow these steps to rebuild your logical drive:.
1.
Click on the Logical Drive
The Logical Drive Window appears
2.
From the Change Logical Drive Settings menu, select Rebuild Logical Drive.
3.
In the Logical Drive Rebuild window, click on the channel number of the disk
drive that requires rebuilding.
4.
Click the Submit button when you are done.
5.
Click OK to confirm the rebuild operation.
Chapter 4: Management with WebPAM PRO
icon.
117
Advertisement
Table of Contents
Need help?
Do you have a question about the VTRAK 15200 and is the answer not in the manual?
Questions and answers