Table of Contents
Advertisement
VTrak 15200 User Manual
the Rebuild, Synchronize or Migrate goes faster but the logical drive takes longer
for reads and writes. A low priority has the opposite result.
1.
Type 6 and Enter to access Priority.
Current rebuilding priority:
Current synchronization priority:High
Current migration priority:
Change to low RBLD priority for LD 2(y/n)?>n
2.
Press Y and Enter to change Rebuilding priority. Press N and Enter to leave
it unchanged.
Change to low SYNC priority for LD 2(y/n)?>n
3.
Press Y and Enter to change Synchronization priority. Press N and Enter to
leave it unchanged.
Change to low migration priority for LD 2(y/n)?>y
4.
Press Y and Enter to change Migration priority. Press N and Enter to leave it
unchanged.
The Screen returns to the Modify Logical Drive Priorities menu.
Hot Spare Policy
A Hot Spare is a disk drive not assigned to a logical drive but available to replace
a failing disk drive that belongs to a logical drive.
A Global spare can be used by any logical drive that needs it. A Dedicated spare
can only be used by a specific logical drive.
1.
Press 7 and Enter to access the Hot Spare Policy.
Current hot spare policy:
Global
Change to Dedicated hot spare policy for LD 2(y/n)?>y
2.
Press Y and Enter to change hot spare policy. Press N and Enter to leave it
unchanged.
Available free Physical Drive(s):
8
9
Choose the free Physical Drive for the dedicated hot spare>8
3.
If you change to a Dedicated hot spare drive, type the ID number of an
available physical drive
The Screen returns to the Modify Logical Drive Priorities menu.
Note: Be sure Auto Rebuilding is enabled (below).
High
High
150
Advertisement
Table of Contents
