Table of Contents
Advertisement
The Parameters and Submenu appear with the new Hot Spare setting.
--------------------------------------------------------------------------------
Logical Drive 2 Parameters:
Name:
Stripe Block Size
Member PDs:
Cache Policy:
Auto Rebuilding:
Priority: High(RBLD), High(SYNC), High(Migration)
SCSI Mapping:
SCSI Mapping:
--------------------------------------------------------------------------------------
Modify Logical Drive 2 Parameters
1. SCSI Assignment
2. Cache Policy
3. Retry Count
4. Enable/Disable SMART
5. Name
6. Priority
7. Hot Spare Policy
8. Auto Rebuilding
R. Return to Previous Menu
Please enter your menu choice>
This concludes the example.
CLU Index
A
Alias, iSCSI – Main Menu, 5 Enter, 1 Enter
Auto Rebuilding, Logical Drive – Main Menu, 3 Enter, 4 Enter
B
Back Plane Box – Main Menu, 1 Enter, 1 Enter, 4 Enter
Battery – Main Menu, 1 Enter, 2 Enter
Battery Board – Main Menu, 1 Enter, 1 Enter, 4 Enter
BIDI CHAP Authentication, iSCSI – Main Menu, 5 Enter, 1 Enter
Boards, VTrak – Main Menu, 1 Enter, 1 Enter, 4 Enter
Boot Sector, Wipe – Main Menu, 2 Enter
Burst Length, iSCSI – Main Menu, 5 Enter, 1 Enter
Buzzer/Beeper – Main Menu
LogDrv2
64K
3,5
Write Through
On
CH 1 LUN 1
CH 2 LUN 1
129
Chapter 5: Management with the CLU
RAID Level:
1
Capacity:
35 GB
Smart Check: On
Retry Count:
2
Hot Spare:
Dedicated(6)
Advertisement
Table of Contents
