Promise Technology VTRAK 15200 User Manual page 139

Chapter 5: Management with the CLU
I cont.
IP Address, iSCSI – Main Menu, 5 Enter, 2 Enter, port no. Enter
IP Address, Management Port – Main Menu, 4 Enter, 1 Enter
IP Address, TFTP Server – Main Menu, 4 Enter
IP Address, Trap Sinks, SNMP – Main Menu, 4 Enter, 4 Enter, 6 Enter
iSCSI, Alias – Main Menu, 5 Enter, 1 Enter
iSCSI, BIDI CHAP Authentication – Main Menu, 5 Enter, 1 Enter
iSCSI, Burst Length – Main Menu, 5 Enter, 1 Enter
iSCSI, CHAP – Main Menu, 5 Enter
iSCSI, CHAP Authentication – Main Menu, 5 Enter, 1 Enter
iSCSI, DA – Main Menu, 5 Enter, 3 Enter, port no. Enter
iSCSI, DA, IP Address – Main Menu, 5 Enter, 3 Enter, port no. Enter
iSCSI, DHCP – Main Menu, 5 Enter, 2 Enter, port no. Enter
iSCSI, DNS – Main Menu, 5 Enter, 2 Enter, port no. Enter
iSCSI, Gateway – Main Menu, 5 Enter, 2 Enter
iSCSI, IP Address – Main Menu, 5 Enter, 2 Enter, port no. Enter
iSCSI, iSNS – Main Menu, 5 Enter, port no. Enter
iSCSI, Network – Main Menu, 5 Enter
iSCSI, Node ID – Main Menu, 5 Enter, 1 Enter
iSCSI, Node – Main Menu, 5 Enter
iSCSI, Ping – Main Menu, 5 Enter
iSCSI, Port – Main Menu, 5 Enter, 2 Enter, port no. Enter
iSCSI, R2T – Main Menu, 5 Enter, 1 Enter
iSCSI, SA – Main Menu, 5 Enter, 3 Enter, port no. Enter
iSCSI, SLP Port – Main Menu, 5 Enter
iSCSI, Subnet Mask – Main Menu, 5 Enter, 2 Enter, port no. Enter
iSCSI, TCP Port Number – Main Menu, 5 Enter, 2 Enter, port no. Enter
iSCSI, Time to Retain – Main Menu, 5 Enter, 1 Enter
iSCSI, Time to Wait – Main Menu, 5 Enter, 1 Enter
L
Label, Controller – Main Menu, 1 Enter, 1 Enter, 2 Enter
LED, Physical Drive, Blink – Main Menu, 2 Enter, 5 Enter
Location, SNMP – Main Menu, 4 Enter, 4 Enter
Logical Drive, Auto Rebuilding – Main Menu, 3 Enter, 4 Enter
Logical Drive, Create – Main Menu, 3 Enter
Logical Drive, Delete – Main Menu, 3 Enter
Logical Drive, LUN Setting (SCSI Assignment) – Main Menu, 3 Enter, 4 Enter
Logical Drive, Media Patrol – Main Menu, 6 Enter
Logical Drive, Migrate – Main Menu, 6 Enter
Logical Drive, Name – Main Menu, 3 Enter, 4 Enter
Logical Drive, Parameters, Modify – Main Menu, 3 Enter
Logical Drive, PDM – Main Menu, 6 Enter
Logical Drive, Priority – Main Menu, 3 Enter, 4 Enter
131