Table of Contents
Advertisement
VTrak 15200 User Manual
Replace Cooling Unit Fan
The blowers (scroll fans) in the cooling units are replaced as individual parts.
There are two blowers in each cooling unit. No tools are required for this
procedure.
To replace a fan, do the following:
1.
Verify that the Fan LED is amber or red and note whether it is Fan 1 or 2
(above).
2.
Press the release button and pull the handle downward as shown above.
If the cooling unit you plan to remove contains the cache backup
battery, your system will be vulnerable to a power failure.
Temporarily set your cache policy to write-through before starting
this procedure. See page 149.
Fan 1 LED
Fan 2 LED
Caution
180
Advertisement
Table of Contents
Need help?
Do you have a question about the VTRAK 15200 and is the answer not in the manual?