Logical Drive Management - Promise Technology VTRAK 15200 User Manual

ID Name
-----------------------------------------------------------------------------------------------------
1 ST3160023AS
2 WDC WD1200JD
3 Maxtor 6Y080M0
--------------------------------------------------------------------------------------------------
Press Enter key to return
Read and Write Counts record the number of input/output transactions.
Read and Write Transactions record the volume of data in Megabytes.
2. Press Enter to return to the Physical Drive Management menu.

Logical Drive Management

From the Main Menu, press 3 and Enter to access Logical Drive Management.
This are deals with logical drive that you create, in contrast to physical drives
which are covered under a separate menu.
PD: physical drive,
SBS: stripe block size, CAP: capacity,
INIT: initialization,
MP: media patrol,
PDM Auto Start option: Disabled
ID Name
----------------------------------------------------------------------------------
1
2
----------------------------------------------------------------------------------
Logical Drive Management
1. Logical Drive Auto Creation
2. Create New Logical Drive
3. Delete Logical Drive
4. Modify Logical Drive Parameters
5. PDM Auto Start Option
R. Return to Previous Menu
Please enter your menu choice>
The Logical Drive Magement submenu lists all logical drives in the order of their
creation, along with name, RAID level, Stripe Block Size, Capacity, physical
drives used and its status.
Status is reported for each logical drive as follows:
• Functional – Normal operation
Read Count
524434
625306
321986
RBLD: rebuild,
RAID SBS
LogDrv1 5
LogDrv2 1E
Chapter 5: Management with the CLU
Read TRANS
2516 Mb
3146 Mb
1743 Mb
LD: logical drive
RC: redundancy check
PDM: predictive data migration
CAP
64K 239GB
64K 265GB
143
Write Count Write TRANS
1048576 1066 Mb
3497525 2443 Mb
2752876 1395 Mb
SYNC: synchronization
Member PDs Status
1-2,4 Functional
3,5,7 SYNC 50%