VTrak 15200 User Manual
1.
Start your PC's terminal emulation program.
2.
Press Enter once to launch the CLU.
There are eight functional groups in the CLU:
Subsystem Management – Allows you view controller information, change
parameters, monitor the enclosure, update the firmware and reboot the VTrak.
Physical Drive Management – Enables you to view disk drive assignments and
parameters, wipe boot and reserve sectors, change disk drive settings and
perform diagnostics.
Logical Drive Management – Allows you to view logical drive information,
create and delete logical drives; change LUN settings, cache policy, hot spare
policy, retry count, SMART settings; rebuilding, synchronization and migration
priorities.
Network Management – Make Management Port, Telnet, and SNMP settings,
set IP address for management port, TFTP server and gateway; and set subnet
mask.
iSCSI Management – Set Node, Port, SLP, CHAP, iSNS settings and ping over
the iSCSI channels.
126