Redundancy Check; Media Patrol - Promise Technology VTRAK 15200 User Manual

Enter the Logical Drive ID>1
Start SYNC for LD 1(y/n)?>y
2. Type the ID number for the logical drive you want to synchronize and press
Enter.
Logical Drive SYNC Started
Press Enter key to return
3. Press Enter to return to the Maintenance menu.
If the logical drive was Functional when Synchronization began, you can
pause and resume the Synchronization process with this same function.
If the Maintenance Activity Monitor is enabled, you can watch
Synchronization progress on your monitor.

Redundancy Check

Use this function to verify the integrity of your data across the physical drives that
make up your logical drive.
1. Press 6 and Enter to access Redundancy Check.
Enter the Logical Drive ID>1
Start RC for LD 1(y/n)?>y
2. Type the ID number for the logical drive on which you want to run a
Redundancy Check and press Enter.
Logical Drive RC Started
Press Enter key to return
3. Press Enter to return to the Maintenance menu.
If the logical drive was Functional when the Redundancy Check began, you
can pause and resume the Redundancy Check process with this same
function.
If the Maintenance Activity Monitor is enabled, you can watch the
Redundancy Check progress on your monitor.

Media Patrol

Use this function to verify the integrity of the magnetic media on the physical
drives that make up your logical drive.
1. Press 7 and Enter to access Media Patrol.
Current MP Information:
MP: disabled
Percentage: 0%
---------------------------------------------------
Media Patrol(MP)
1. Enable/Disable MP
Chapter 5: Management with the CLU
157