Table of Contents
Advertisement
Chapter 2: Installation
•
Unpack the VTrak storage subsystem (below)
•
Mount VTrak 15200 in a rack (page 8)
•
Install disk drives (page 9)
•
Set Up Network Connections (page 15)
•
Set Up Serial Connections (page 17)
•
Connect the Power (page 18)
•
Set IP Address with the CLU (page 20)
•
Set up Telnet Connection (page 23)
•
Install WebPAM PRO (page 25)
Unpack the VTrak
The VTrak box contains the following items:
•
VTrak 15200 Unit
•
Quick Start Guide
•
Null Modem Cable
•
Left and right mounting rails
The electronic components within the VTrak disk array are
sensitive to damage from Electro-Static Discharge (ESD).
Observe appropriate precautions at all times when handling the
VTrak or its subassemblies.
Use the following categories of network cables for the iSCSI
connections on VTrak:
•
Cat 6, preferred
•
Cat 5E, minimum
•
(64) Screws for disk drives (4 spares)
•
(2) 1.5m (4.9 ft) Power cords
•
CD with WebPAM Software, User
Manual and Quick Start Guide
Warning
Important
7
Advertisement
Table of Contents
Need help?
Do you have a question about the VTRAK 15200 and is the answer not in the manual?