Network Management - Promise Technology VTRAK 15200 User Manual

VTrak 15200 User Manual
2. Pause
R. Return to Previous Menu
Please enter your menu choice>1
Enable MP(y/n)?>y
2. Do one of the following:
• Press 1 and Enter to enable/disable Media Patrol. Then press Y and
Enter to confirm.
• Or press 2 and Enter to pause/resume Media Patrol. Then press Y and
Enter to confirm.
3. When you are done, press R and Enter to return to the Maintenance menu.
If the Maintenance Activity Monitor is enabled, you can watch the Media
Patrol progress on your monitor.

Network Management

From the Main Menu, press 4 and Enter to access Network Management.
The Network Management menu displays with the factory default settings shown
above it.
Management Port IP Address: 192.168.1.22
Subnet Mask: 255.255.255.0
Gateway IP Address: 192.168.1.1
Telnet: disabled
TFTP Server IP Address: 192.168.1.81
SNMP Name: Irvine
SNMP Location: Promise
---------------------------------------------------------------
Network Management
1. Management Port
2. Telnet
3. TFTP Server
4. SNMP
5. Ping
R. Return to Previous Menu
Please enter your menu choice>
Management Port
Use this feature to change the IP addresses for VTrak's Management port and
Gateway plus the Subnet Mask.
1. Press 1 and Enter to access the Management Port settings.
158