Machine Control System (Mcs) Imager Status Messages - Konica Minolta DRYPRO SIGMA 2 Operation Manual

Machine Control System (MCS) Imager Status Messages

The table describes how the display screen and Web Portal indicate imager status:
Printer Status Display Screen
Service Mode
Offline
Failed (Code will vary)
Self-test
Warming
Cover is
Open
AD3435_en | 2017-11-17
Web Portal
(remote) Display DICOM Status
Service Mode WARNING /
PRINTER
OFFLINE
Printing Disabled WARNING /
PRINTER
OFFLINE
Failed See error
tables
Self-test WARNING
/PRINTER INIT
Warming=xx WARNING /
PROC INIT
Cover Open WARNING /
COVER OPEN
Maintenance and Troubleshooting
Description
The service over-
ride switch is
enabled. The
imager is not
ready.
Printing/delivery
has been disabled.
An error occurred
that prevents print-
ing.
This occurs when
power is first
applied to the
MCS.
The processor is
currently warming
up and will not be
ready to print for
xx minutes.
A imager cover is
open. imager not
ready. (A side cover
could be off.)
3–11