set toy sleep — disable TOY clock's internal oscillator
Disables the DS1386 TOY clock's internal oscillator, lengthening the shelf life
of the device. When you execute this command, bit 8 of the MONTH register
of the device is set to 1, disabling the TOY clock's oscillator. The TOY clock's
time registers cease to advance, and the life of the device's internal lithium
battery is lengthened. The next time the system is powered up, the oscillator is
automatically reenabled by the console and time is once again counted by the
TOY device.
This command is for use by manufacturing at final test or by users who want to
put the system into storage.
You must reset the time and date once the module is powered up after
disabling the battery.
Syntax
set toy sleep
Example
>>> set TOY SLEEP
Sets the TOY clock into storage mode. The clock is automatically reenabled on
subsequent initialization.
Note
Console Commands 13–85
set toy sleep