DEC Digital Alpha VME 4/224 User Manual page 382

net
-lw wait_in_secs
Waits the specified number of seconds for the loop messages from the -l1 option
to return. If the messages do not return in the specified time period, an error
message is generated.
-sv mop_version
Sets the preferred MOP version number for operations. Valid values are 3 or 4.
Examples
>>> net -sa
1.
-ewa0: 08-00-2b-1d-02-91
Displays the local Ethernet port station address.
>>> net -s
2.
DEVICE SPECIFIC:
TI: 203 RI: 42237 RU: 4 ME: 0 TW: 0 RW: 0 BO: 0
HF: 0 UF: 0 TN: 0 LE: 0 TO: 0 RWT: 39967 RHF: 39969 TC: 54
PORT INFO:
tx full: 0 tx index in: 10 tx index out: 10
rx index in: 11
MOP BLOCK:
Network list size: 0
MOP COUNTERS:
Time since zeroed (Secs): 2815
TX:
Bytes: 116588 Frames: 204
Deferred: 2 One collision: 52 Multi collisions: 14
TX Failures:
Excessive collisions: 0 Carrier check: 0 Short circuit: 0
Open circuit: 0 Long frame: 0 Remote defer: 0
Collision detect: 0
RX:
Bytes: 116564 Frames: 194
Multicast bytes: 13850637 Multicast frames: 42343
RX Failures:
Block check: 0 Framing error: 0 Long frame: 0
Unknown destination: 42343 Data overrun: 0 No system buffer: 22
No user buffers: 0
>>>
Displays the EWA0 port status, including the MOP counters.
13–74 Console Commands