This chapter describes how to unpack, configure, install, and verify proper
operation of the Digital Alpha VME 4 module.
2.1 Unpacking
Your Digital Alpha VME 4 hardware kit contains the items listed in Table 2–1.
Save the original packing material in case a factory return is necessary.
You must install the primary breakout module (54-24663-01) included
in your hardware kit (see Figure 2–7). Applying power to the Digital
Alpha VME 4 module WITHOUT that primary breakout module in place,
or WITH the breakout module included with the AXPvme 160, 166, or
230 (P/N 54–22605–01) in place may damage your backplane, the Digital
Alpha VME 4 module, or both.
Figure 2–1 shows the Digital Alpha VME 4 module and its options.
Installation Procedures
Caution
Installation Procedures 2–1
2