DEC Digital Alpha VME 4/224 User Manual page 344

examine
ipr- name Names an internal processor register. The size defaults to
quadword; the address space defaults to ipr. The following
symbols for name are recognized: ps, asn, asten, astsr, at,
fen, ipir, ipl, mces, pcbb, prbr, ptbr, scbb, sirr, sisr, tbchk,
tbia, tbiap, tbis, esp, ssp, usp, and whami.
pt- name Names a PAL Temporary register. The data size defaults to
quadword; the address space defaults to pt. The following
symbols for name are recognized: pt0, pt1, . . . pt31.
PC Names the Program Counter (execution address register).
The last address, size, and type are unchanged.
+ Names the location immediately following the last location
referenced by the examine or deposit command. For
references to physical or virtual memory, the location is the
last address plus the size of the last reference. For other
address spaces, the address is the last address referenced
plus one.
- Names the location immediately preceding the last location
referenced by the examine or deposit command. For
references to physical or virtual memory, the location is the
last address minus the size of the last reference. For other
address spaces, the address is the last address referenced
minus one.
* Names the location last referenced by the examine or
deposit command.
@ Uses the data at the last location referenced by the examine
or deposit command as the address.
Options
-b
The data size is byte.
-w
The data size is word.
-l
The data size is longword.
-q
The data size is quadword.
13–36 Console Commands