DEC Digital Alpha VME 4/224 User Manual page 342

examine
examine — display memory data
Displays data located at a specified address: a memory location, a register, a
device, or a file.
After initialization, if you have not specified a data address or size, the default
address space is physical memory, the default data size is a quadword, and the
default address is zero.
You specify an address or device by concatenating the device name with the
address, for example, PMEM:0, and by specifying the size of the data to be
displayed.
If you do not specify an address, the data at the current address is displayed in
the current data size (the last previously specified address and data size).
If you specify a conflicting device, address, or data size, the console ignores the
command and issues an error response.
The display line consists of the device name, the hexadecimal address (or offset
within the device), and the examined data, also in hexadecimal.
The examine command uses the same options as the deposit command.
Additionally, the examine command supports instruction decoding, the -d option,
which disassembles instructions beginning at the current address.
Syntax
2 3
2
-b
6 6 7 7
-physical
-w
6 6 7 7 6 6
-virtual
-l
6 6 7 7 6 4
-gpr
e[xamine]
-q
6 4 7 5
-fpr
-o
-ipr
-h
-d
Arguments
[ device :]
Specifies the device name or address space to access. The following devices are
supported:
pmem: Physical memory.
13–34 Console Commands
3
7 7
7 5
[-n count ] [-s step ] [ device :] address data