Deleting E-Mail Notifications; Working With User Accounts; About Local User Accounts; Creating Local User Accounts - Quantum Scalar i500 User Manual

Deleting E-mail Notifications

Administrative users can delete an e-mail notification when it is no longer needed.
The default
Note
modified, but not deleted. The e-mail address, techsup@quantum.com, cannot
be modified.
The path to open the appropriate screen is as follows:
• From the web client, select Setup > Notification > Setup.

Working With User Accounts

Administrative users can create local user accounts on the library or enable and configure the Lightweight
Directory Access Protocol (LDAP). LDAP is the industry standard Internet protocol that provides centralized
user account management. When LDAP is enabled, users can log into the library using either LDAP or local
authentication.

About Local User Accounts

Administrative users can create and modify two types of local user accounts: user and administrative user.
These users have different library privilege levels.
• User — has access to one or more assigned partitions and can perform functions within a partition,
such as performing media and tape drive functions. A user cannot perform actions that affect the
physical library, such as creating, modifying, or deleting a partition.
• Administrative user — has access to the entire physical library and all of its partitions.
The library ships with a default administrative user account. The user name for this account is admin and
the password is password. You cannot delete this user account or change the user name, but you can
change the password. The default administrative user account is used to perform the initial configuration of
the library. If you misplace the password for the default administrative account, contact Technical Support.
For contact information, see
See User Privileges on page 29 for more information on library permission levels. For information on
changing passwords, see

Creating Local User Accounts

During or after the initial configuration, you can use the default administrative user account to create up to
eighteen additional local user accounts, including other accounts with administrative privileges. These
administrative users can themselves create other local administrative user and user accounts. Users
without administrative privileges cannot create user accounts. The library can contain eighteen user
accounts, including the default administrative user account.
To create local user accounts, you need to provide information for the following fields:
User Name — the login name of the user account you are creating. User names are limited to 1–
•
12 lower-case alphanumeric characters and can include an underscore ( _ ); for example,
"john_usa."
• Password — the unique password for the user account you are creating. Passwords are limited to
6–12 lower-case alphanumeric characters and can include an underscore ( _ ); for example,
"pass_19."
58 Configuring Your Library
techsup@quantum.com
Getting More Information or Help
Modifying Local User Accounts
e-mail notification settings can be
on page 4.
on page 59