Table of Contents
Advertisement
BRAKE
INSPECTION
1. Inspect:
S Master cylinder 1
Wear/scratches ! Replace the master cyl-
inder assembly.
S Master cylinder body 2
Cracks/damage ! Replace.
S Oil delivery passage (master cylinder body)
Blow out with compressed air.
2. Inspect:
S Master cylinder kit 1
Scratches/wear/damage ! Replace as a
set.
BRAKE MASTER CYLINDER ASSEMBLY
WARNING
S All internal parts should be cleaned only
with new brake fluid.
S Internal parts should be lubricated with
brake fluid when installed.
Recommended brake fluid:
DOT 4
S Replace the piston seals and dust seals
whenever a caliper is disassembled.
INSTALLATION
1. Connect:
S Brake hose
NOTE:
When installing the brake hose onto the brake
master cylinder, make sure that the brake pipe
touches the projection a as shown.
Union bolt (brake hose):
30 Nm (3.0 mSkg, 22 ftSlb)
4-35
POWR
TR
Advertisement
Table of Contents
Troubleshooting
