Table of Contents
Advertisement
A
C
D
PRIMARY SHEAVE AND DRIVE V-BELT
B
5. Inspect:
S Weight 1
S Roller 2
S Bushing 3
S Slider 4
S Rivet 5
S Collar
Wear/scratches/damage ! Replace.
Slider inside clearance
Min. 0 mm (0 in)
Max. 0.3 mm (0.0118 in)
Rivet replacement steps:
S Remove old rivet with the appropriate drill.
S Insert the rivet 1 from the ID mark 2 side.
S Press or peen the rivet head so that the di-
ameter a of the rivet head measures 8.2
mm (0.32 in) or larger.
6. Measure:
S Bushing inside diameter
Out of specification ! Replace as a set.
Bushing inside diameter:
A Roller
New: 9.077 mm (0.357 in)
Wear limit: 9.3 mm (0.366 in)
B Weight
New: 8.077 mm (0.318 in)
Wear limit: 8.3 mm (0.327 in)
NOTE:
When replacing the weight and roller bushings,
use the YXR clutch bushing jig kit.
YXR clutch bushing jig kit:
YS-39752
C Removing
D Installing
4-6
POWR
TR
+
:
Advertisement
Table of Contents
Troubleshooting
