Yamaha 2006 RX10GTAXW Service Manual page 757

ENGINE OIL REPLACEMENT
S Apply a thin coat of engine oil onto the O-ring
1 of the new oil filter cartridge.
CAUTION:
Make sure that the O-ring 1 is positioned
correctly in the groove of the oil filter car-
tridge.
S Tighten the new oil filter cartridge to specifica-
tion with an oil filter wrench.
6. Install:
S Drain bolts
(along with the new gaskets)
7. Fill:
S Engine oil
(with the specified amount of the recomen-
ded engine oil)
Add 2.0 L (1.8 lmp qt, 2.1 US qt) of the recom-
mended engine oil to the oil tank, and then
install and tighten the oil level gauge/dipstick
and the cylinder head cap.
8. Inspect:
S Engine and oil tank
(for engine oil leaks)
9. Inspect:
S Engine oil level
Refer to "ENGINE OIL INSPECTION".
2-23
INSP
ADJ
Oil filter cartridge:
17 Nm (1.7 mSkg, 12 ftSlb)
Drain bolt (oil tank):
16 Nm (1.6 mSkg, 12 ftSlb)
Drain bolt (oil pan):
30 Nm (3.0 mSkg, 22 ftSlb)
Quantity
Total amount
3.8 L (3.3 Imp qt, 4.0 US qt)
Periodic oil change
2.8 L (2.5 Imp qt, 3.0 US qt)
With oil filter replacement
3.0 L (2.6 Imp qt, 3.2 US qt)