Yamaha 2006 RX10GTAXW Service Manual page 1142

WATER PUMP
INSPECTION
1. Inspect:
S Water pump housing cover 1
S Water pump housing 2
S Impeller 3
S Rubber damper 4
S Rubber damper holder 5
S Water pump seal
S Oil seal
Cracks/damage/wear ! Replace.
2. Inspect:
S Bearing
Rough movement ! Replace.
ASSEMBLY
1. Install:
S Oil seal
New
(to the water pump housing)
NOTE:
S Before installing the oil seal, apply tap water or
coolant onto its outer surface.
S Install the oil seal with a socket that matches
its outside diameter.
2. Install:
S Bearing
NOTE:
Install the bearing with a socket that matches its
outside diameter.
3. Install:
S Water pump seal
CAUTION:
Never apply oil or grease onto the water
pump seal surface.
6-10
COOL
1
New