Yamaha 2006 RX10GTAXW Service Manual page 902

PRIMARY SHEAVE AND DRIVE V-BELT
4-3
REMOVAL
1. Remove:
S Primary sheave assembly 1
NOTE:
Use the primary sheave holder 2 and primary
sheave puller 3 .
Primary sheave holder:
90890-01701, YS-01880
Primary sheave puller:
90890-01898
YS-01881-1, YS-01882-1
DISASSEMBLY
1. Remove:
S Fixed sheave 1
S Stopper 2
S Sliding sheave 3
S Bushing 4
S Spider 5
Removal steps:
S Immerse the primary sheave assembly in 80
X 100_C (176 X 212_F) water for several
minutes.
S Attach the lower piece of the clutch spider
separator 6 onto a rigid table using suitable
mounting bolts.
Then, install the clutch separator adapter 7
onto the separator.
Clutch spider separator:
90890-01711, YS-28890-B
Clutch separator adapter:
90890-01740, YS-34480
POWR
TR