Switch Inspection - Yamaha 2006 RX10GTAXW Service Manual

Table of Contents

Advertisement

SWITCH INSPECTION

ELECTRICAL
SWITCH INSPECTION
SWITCH INSPECTION
Use a pocket tester to check the terminals for
continuity. If the continuity is faulty at any point,
replace the switch.
Pocket tester:
90890-03112, YU-03112
NOTE:
S Set the pocket tester to "0" before starting a
test.
S When testing the switch for continuity the
pocket tester should be set to the "
range.
S When checking the switch turn it on and off a
few times.
INSPECTING A SWITCH SHOWN IN THE
MANUAL
The terminal connections for switches (main
switch, handlebar switch, engine stop switch,
light switch, etc.) are shown in a chart similar to
the one on the left.
This chart shows the switch positions in the col-
umn and the switch lead colors in the top row.
For each switch position, "
the terminals with continuity.
The example chart shows that:
1 There is continuity between the "Red and Brown"
leads when the switch is set to "ON".
2 There is continuity between the "Red / White and
Brown/ White" leads when the switch is set to
"START".
8-1
ELEC
1" Ω
" indicates

Advertisement

Table of Contents
loading

Table of Contents