Table of Contents
Advertisement
FUSE INSPECTION/SPEEDOMETER UNIT INSPECTION
WARNING
Never use a fuse with an amperage other
than that specified. Improvising or using a
fuse with the wrong amperage rating may
cause extensive damage to the electrical
system, cause the lighting, ignition, grip
warmer, signal and meter systems to mal-
function and could possibly cause a fire.
SPEEDOMETER UNIT INSPECTION
1. Inspect:
S Speedometer unit
Inspection steps:
S Remove the speedometer coupler 1 and
headlight coupler 2 .
S Connect the speedometer unit test coupler 3
to the speedometer coupler and headlight
coupler.
S Connect the speedometer unit test coupler
leads as follows.
Speedometer unit test coupler lead (red) 4
! Battery (+) terminal
Speedometer unit test coupler lead (black)
5 ! Battery (–) terminal
Speedometer unit test coupler:
8EK-82507-09, YS–45686
S Check that the light and LCD in the speedome-
ter light up.
S If the light does not light up. ! Check the
bulbs.
Refer to "BULB(S)" in CHAPTER 8.
S If the LCD is not indicated. ! Replace the
speedometer unit.
2-51
INSP
ADJ
Advertisement
Table of Contents
Troubleshooting
