Table of Contents
Advertisement
BRAKE
2. Install:
S Brake pads
S Pad spring
Installation steps:
S Connect a suitable hose 1 tightly to the cali-
per bleed screw 2 . Put the other end of this
hose into an open container.
S Loosen the caliper bleed screw and push the
pistons into the caliper with your finger.
S Tighten the caliper bleed screw 2 .
Bleed screw:
6 Nm (0.6 mSkg, 4.3 ftSlb)
S Install the brake pads and pad spring.
3. Inspect:
S Brake fluid level
Refer to "BRAKE FLUID LEVEL INSPEC-
TION" in CHAPTER 2.
4. Check:
S Brake lever operation
A soft or spongy feeling ! Bleed brake sys-
tem.
Refer to "AIR BLEEDING (HYDRAULIC
BRAKE SYSTEM)" in CHAPTER 2.
4-30
POWR
TR
Advertisement
Table of Contents
Troubleshooting
