Yamaha 2006 RX10GTAXW Service Manual page 765

SHEAVE OFFSET ADJUSTMENT/DRIVE V-BELT
3. Measure:
S Secondary sheave freeplay (clearance) a
Use a feeler gauge.
Out of specification ! Adjust.
Secondary sheave free play
(clearance):
1.0 X 2.0 mm (0.04 X 0.08 in)
4. Adjust:
S Secondary sheave freeplay (clearance)
Adjustment steps:
S Apply the brake to lock the secondary sheave.
S Remove the bolt 1 and washer 2 .
S Adjust the secondary sheave freeplay (clear-
ance) by adding or removing a shim(s) 3 .
Part number
90201-222F0
90201-225A4
DRIVE V-BELT
WARNING
When installing the new V-belt, make sure
that it is positioned from 1.5 mm (0.06 in)
above the edge of the secondary sheave to
–0.5 mm (–0.02 in) below the edge a .
If the V-belt is not positioned correctly, the
clutch engagement speed will be changed.
The machine may move unexpectedly when
the engine is started.
Adjust the V-belt position by removing or
adding a spacer 1 on each adjusting bolt
2 .
CAUTION:
As the V-belt wears, adjustment may be nec-
essary. To ensure proper clutch perfor-
mance, the V-belt position should be ad-
justed by adding a spacer on each adjusting
bolt when the V-belt position reaches 1.5
mm (0.06 in) below the edge.
2-27
INSP
ADJ
Shim size
Thickness
0.5 mm (0.02 in)
1.0 mm (0.04 in)