Yamaha 2006 RX10GTAXW Service Manual page 1179

a
b
IGNITION SYSTEM
IGNITION SPARK GAP
1. Remove:
S Ignition coil
2. Measure:
S Ignition spark gap
Out of specification ! Replace the ignition
coil
Measurement steps:
S Disconnect the ignition coil 2 from the spark
plug.
S Connect the dinamic spark tester 1 .
S Set the main switch to "ON".
S Measure the ignition spark gap a .
Spark gap:
6 mm (0.24 in)
IGNITION COIL
1. Disconnect:
S Ignition coil lead
2. Connect:
S Pocket tester
3. Measure:
S Primary coil resistance a
S Secondary coil resistance b
Out of specification ! Replace.
Primary coil resistance:
0.16 X 0.22 Ω at 20_C (68_F)
Secondary coil resistance:
5.0 X 6.8 kΩ at 20_C (68_F)
8-6
ELEC