Table of Contents
Advertisement
FUEL PUMP
INSPECTION
1. Inspect:
S Fuel hose 1
S Vacuum hose 2
Clogs/damage ! Replace.
2. Inspect:
S Fuel pump operation.
Inspection steps:
S Connect the Mity vac 1 to the vacuum hose
2 .
Mity vac:
90890-06756, YB-35956
S Place a container 3 under the end of the fuel
hoses 4 .
S Operate the Mity vac 1 while checking that
fuel flows from the fuel hoses 4 .
S If fuel does not flow out, replace the fuel pump.
INSTALLATION
NOTE:
After installing all parts, refer to "CABLE ROUT-
ING" in CHAPTER 9, to check the cable, lead
and hose routings.
7-12
CARB
Advertisement
Table of Contents
Troubleshooting
