Table of Contents
Advertisement
ENGINE ASSEMBLY
ENGINE
ENGINE ASSEMBLY
INSTALLATION
NOTE:
After installing all parts, refer to "CABLE ROUT-
ING" in CHAPTER 9, to check the cable, lead
and hose routing.
1. Install:
S Engine mounting adjust bolts
S Engine
S Engine mounting bolts and nuts
NOTE:
Use the pivot shaft wrench to tighten the engine
mounting adjust bolts.
Installation steps:
S Install the special tool 1
Engine mount spacer wrench
90890–01516, YS–01516
S Tighten the rear engine mounting adjust bolt.
Bolt (engine mounting adjust):
7 Nm (0.7 mSkg, 5.1 ftSlb)
S Tighten the rear engine mounting nut.
Nut (engine mounting):
65 Nm (6.5 mSkg, 47 ftSlb)
S Tighten the front right and left engine mount-
ing adjust bolts until they come to cantact
with the engine damper. At this time, do not
apply torque to the engine mounting adjust
bolts.
S Tighten the front right and left engine mount-
ing nuts.
Nut (engine mounting):
65 Nm (6.5 mSkg, 47 ftSlb)
35
ENG
Advertisement
Table of Contents
Troubleshooting
