Searching The Functions Using The Cursor Key - Muratec MFX-1200 Operating Instructions Manual

Searching the functions using the cursor key

In this manual, we explain the operation with short-cut operations (for example, we
will say, press Program key, , 1, 0, 1. . . ), however you can search and enter
A
almost all of functions using the Program key and Cursor key.
Helpful Tip: When you want to search any function settings in your machine, you
will need the function table (see next page) for your searching. Please
use it for your help.
To search and enter the function set-
tings:
1
Press the Program key.
2
Search the level one function
groups using or of cursor key
until your desired item appears.
3
After you find the level one function item you want to program, press
cursor key to go to the level two function groups .
4
Search the level two function groups using
desired item appears.
5
After you find the level two function item you want to program, press
cursor key to go to the level three function groups .
6
Search the level three function groups using
desired function appears.
Note: You can go back to previous level function groups by pressing
cursor key before you have entered the level three function by press-
ing .
ENTER
7
Press to entry the function setting.
ENTER
Note: You can press Program key to entry the setting instead of
Program key
Cursor keys
of
or of cursor key until your
of
or of cursor key until your
of
ENTER
.
Getting started
1.13