Delayed Transmission; Setting Up A Delayed Transmission - Muratec MFX-1200 Operating Instructions Manual

Delayed transmission

Take advantage of lower evening and weekend long-distance rates with delayed
transmission. Your fax machine can store up to 99 delayed commands, each of which
you can program up to 31 days in advance.
Important: If you program all 99 delayed transmission commands, no further
memory transmission is possible until one or more of the commands is
completed. (To review Memory transmission, see page 2.3.) However, if
all 99 delayed commands are programmed, you can always transmit
with the Real time transmission from ADF (see page 2.3).

Setting up a delayed transmission

Important: Your machine only remembers the day of the month that it s supposed
to send a delayed transmission. It does not remember the month
itself. So if you want to send a transmission at 5:05
don t program the transmission sooner than 5:06
To set up a delayed transmission:
1
Insert the document and make any necessary adjustments.
2
Press . The
ADVANCED FUNCTIONS
1.Delayed
← ← / → → /Enter
3
Press . The shows the current day of the month, followed by the
ENTER LCD
current time (in 24-hour format):
Delayed
Enter Time: 06/17:16
4
Use the numeric keypad to enter the day of the month and the time when you
want the fax to send the delayed transmission.
Note: Press to move the cursor left, or
Here, we ve set the transmission to occur on the 11th at 11:05
Delayed
Enter Time: 11/23:05
on June 26,
PM
on May 26.
PM
shows:
LCD
to move it right.
:
PM
5
When the date and time are entered, press
mission. The shows:
LCD
Enter Fax Number
_
6
Enter the fax number for the delayed transmission document. You can either
press a one-touch key, enter a speed-dial number or use the numeric keypad
to enter the fax number.
7
Press . Your machine returns to standby mode, while showing this on
START
the :
LCD
** Reserved **
Jan 29 2000 17:17
This means your fax machine is reserved for the delayed transmission you
just programmed.
If you set the machine for memory transmission, it will scan the document
into memory, after which you can use the machine normally.
If you set the machine for non-memory transmission (real time transmis-
sion), the machine can receive faxes but can t transmit until your delayed
command has been performed.
Important: If you specified the delayed non-memory transmission (real
time transmission), do not remove the document in
document is removed from
pletes, it cancels the delayed real time transmission.
Advanced features
to save the delayed trans-
ENTER
. If the
ADF
before a delayed command com-
ADF
3.11