10
Change the subject, and press [Enter].
•
Up to 80 characters can be entered for the subject.
•
For details on entering characters, refer to Chapter 1, "Entering Characters" in the
Administrator's Guide.
11
To edit the message, press [Text].
If you do not want to change it, proceed to step 13.
12
Change the message, and press [Enter].
•
Up to 1024 characters can be entered for the mail text.
•
Press [
•
Press [ViewText] to confirm the mail text that has been entered. Press [Close] to return to
the entry screen.
•
For details on entering characters, refer to Chapter 1, "Entering Characters" in the
Administrator's Guide.
13
Press [Enter].
To print the specified cover page to check it, press [Print], and then [Yes]. Proceed to step 15.
14
Press [Close].
15
Specify the destination, and press <Start>.
For details on specifying the destination, refer to
Specifying the Transmission Time (Delayed Transmission)
You can use this function to specify the date and time to perform transmission.
•
You can specify a time and date up to a month ahead. The document for delayed
transmission is stored in memory until the specified time, at which point transmission
will start.
•
If real time transmission is specified, the document will remain loaded until the
specified time, so you will not be able to copy, scan, or transmit other faxes.
•
This function can be also specified in combination with other functions (such as
broadcast, polling, F-Code transmission, and F-Code polling).
1
Load the document, and press <Fax>.
2
Press [Advanced].
4-14
Various Fax Functions
] to enter a line break. A line break takes up two characters.
"Specifying
Destinations".
(See page 5-2.)