ResettNg The SettNgs; Memory Overflow Message - Muratec MFX-1450 User Manual

Resetting the settings
• Automatic reset
When no operatons are performed for a set perod of tme after copyng, the
machne wll return to the default settng status.
The screen s preset to three mnutes at the tme of shpment. You can change the
reset tme. You can also reset the screen mmedately after scannng a document
(page 9-25).
• Resetting the settings by pressing <Reset>
Press <Reset> to return to the default settngs.
After copyng, press <Reset> to reset the settngs for the next user.

Memory overflow message

If the memory overflows while scanning the first page
• Press <Stop> to return to the standby mode.
Change the resoluton or wat untl memory becomes avalable before tryng to
copy agan.
If the memory overflows while scanning page 2+
• Press [Yes] to copy the stored pages. Or, press [No] to cancel the copy job.
Change the resoluton or wat untl memory becomes avalable before tryng to
copy agan.
DA7-909H0-60.indb 3
B 2-3
EForE coPying
2007/04/26
Basic
1
2
3
4
5
6
7
8
9
10
11
12
13
AI
20:13:09