Settings for operation
Setting of the silent mode
Default setting: OFF.
Silent mode allows you to mute the ringer, the alarm and the key tones.
To setting a silent mode:
1
Press
,
, 2, 1, [Enter].
MENU
J
The
shows your fax's current setting.
LCD
The silent mode has following settings:
• Silent mode — If you set to this "ON",
the following three settings can be effec-
tive. If you chose "OFF", the machine will
ring and beep as usual, even if you set to
the following settings on.
• Ringer Silent — If you want to mute a
ringer that alerts you when you receive fax
or voice call and a call request, chose
"ON". Otherwise, chose "OFF".
• Alarm Silent — If you want to disable the sound your machine makes
when an error occurs, and the beep your machine makes after sending or
receiving a fax or making a copy, chose "ON". Otherwise, chose "OFF".
• Key tone Silent — If you want to mute the key tone that your machine
makes when you press the keys on the control panel, chose "ON".
Otherwise, chose "OFF".
• Volume — This optional setting can be set if you set the "Alarm" or
"Key tone" to "OFF". You can adjust the volume for the alarm and key
tones. Also, when you set the "Silent" to "OFF", you can set this setting.
2
To effect the settings of the silent mode:
Select "Silent" and press [Enter].
Select "ON" and press [Enter].
Note: If you chose "OFF", the machine will
ring and beep as usual, skip to step 9.
3
To set the "Ringer Silent":
Select "Ringer Silent" and press [Enter].
If you want to turn off the ringer, select "ON"
and the machine will be quiet.
Otherwise, the machine will ring.
4
Press [Enter] to save the setting.
5
To set the "Alarm Silent":
Select "Alarm Silent" and press [Enter].
If you want to turn off the alarm, select "ON"
and the machine will be quiet.
Otherwise, the machine will beep.
6
Press [Enter] to save the setting.
7
To set the "Key tone Silent":
Select "Key tone Silent" and press [Enter].
If you want to turn off the tones, select "ON"
and the machine will be quiet.
Otherwise, the machine will beep when the
keys are pressed.
8
Press [Enter] to save the setting.
Beyond the Basics
3.7