Front Wheel Bearing; Front Wheel Disassembly - Honda XL200 2001 Shop Manual

FRONT WHEEL/SUSPENSION/STEERING
WHEEL BEARING
Remove the brake panel and dust seal.
Turn the inner race if each bearing with your finger, the bearing
should turn smoothly and quietly.
Also check that the bearing outer race fits tightly in the hub.
Remove and discard the bearings if the races do not turn
smoothly, quietly, or if they fit loosely in the hub.
NOTE
Replace wheel bearings in pairs.
DISASSEMBLY
Remove the speedometer gear box, dust seal and speedometer
gear retainer.
Remove the side collar from the left hub.
Remove the hub cover and brake disc.
NOTE
Check for disc warpage; see page 13-5.
WHEEL BEARING REPLACEMENT
Remove the wheel bearings and distance collar from the wheel
hub.
TOOLS
Bearing remover head, 15 mm
Bearing remover shaft.
NOTE
Never reinstall oil bearings. Once the bearings have been
removed, they must be replaced with a new one.
1 1 -8
BEARING
SPEEDOMETER GEAR BOX
DUST SEAL SPEEDOMETER GEAR RETAINER
COLLAR BRAKE DISC
REMOVER SHAFT
REMOVER HEAD
XL2 0 0
HUB COVER