Selecting Paper Tray; Automatically Selecting Paper Tray; Selecting Paper Tray [Paper Supply] - Fuji Xerox 1015S Series Instruction Manual

This feature allows you to select a paper tray loaded with the required paper size for copying. There are two
ways to do this: the tray is automatically selected to match the document size or is manually specified.
The factory setting for this Paper Supply feature is Auto.
The factory setting can be changed in the Tools Mode. For details, refer to "8.3 Setting Tools Mode".
When a paper tray runs out of paper during copying, it will switch to another tray loaded with the same paper size/ type (for
normal paper: 64-105 g/m
Tools Mode. If all the trays are loaded with the same paper size/type (normal paper 64-105 g/m
trays will be switched in the order of trays 1, 2, 3, and 4. If the optional tray 6 (HCF) is installed, it will be switched first before the
rest of the trays.
5.3.1

Automatically Selecting Paper Tray

Auto
Based on the detected document size and the % specified in Reduce/Enlarge, a paper tray loaded with the
required paper size for copying will be selected automatically.
When paper is not loaded in the automatically selected tray or when the document size cannot be detected, a message will be
displayed. Follow the instructions to proceed.
When Auto % is selected for Reduce/Enlarge or Auto for Paper Supply, the document image will be rotated to fit the
orientation of the paper loaded for copying. However, this is only applicable when a standard-sized document is being copied to
a standard-sized paper smaller than A4. For non-standard paper sizes, the image cannot be automatically rotated.
This feature is not applicable to tray 5 (bypass).
"3.2 Loading Documents"
You cannot select Auto % for
Reduce/Enlarge and Auto for
Paper Supply at the same time. For
details, refer to "5.2 Enlarging/
Reducing Image".
84

Selecting Paper Tray

5.3
2
) and orientation to continue copying (Auto Tray Switching feature). You can specify this setting in the
Procedure
1
Load the documents.
2
From Reduce/Enlarge, select the desired % except Auto %.
Check that Auto is selected for Paper Supply.
Basic
Features
1 -> 1 Sided
1 -> 2 Sided
(Head to Head)
2 -> 2 Sided
(Head to Head)
2 -> 1 Sided
(Head to Head)
More...
Added
Image Quality
Features
2 Sided Reduce/Enlarge
100%
Auto %
70%
A3->A4,B4->B5
81%
B4->A4,B5->A5
86%
A3->B4,A4->B5
141%
Sample Set
A4->A3,B5->B4
Off
More...
Doc.>50
Off
Paper Supply
2
) and orientation, the paper
Stored
Output Format
Job Templates
Paper Supply
Original Type
Auto
Text
(Normal Text)
Tray 1
A4 P Mixed Size
Originals
Tray 2
Off
A4
Tray 3
B4
Finishing
Tray 4
A3
Auto
Tray 5 (Bypass)
A4 P
Lighter/Darker
Tray 6 (HCF)
A4 P