Regarding The Indicator Lamps - Christie APS Series User Manual

Troubleshooting

Regarding the indicator lamps

When operation of the POWER/STATUS and STATUS DETAIL indicators differs
from usual, check and cope with it according to the following table.
POWER/STATUS
indicator
Lighting
In
Orange
Blinking
In Green
Lighting
In
Green
Blinking
In Orange
Blinking
In Red
3 times
(continued on next page)
LWU650-APS/LWU530-APS
User's Manual - Operating Guide
STATUS
DETAIL
indicator
Turned
The projector is in a standby state.
Please refer to the section "Power on/off".
off
Turned
The projector is warming up.
Please wait.
off
Turned
The projector is in an on state.
Ordinary operations may be performed.
off
Turned
The projector is cooling down.
Please wait.
off
The light source does not light. There is a
possibility that interior portion has become
heated, or that the power supply is unstable.
Please turn the power off, and allow the projector to
Blinking
cool down at least 20 minutes. After the projector has
In Red
sufficiently cooled down, please make confirmation of
0 ～ 5 times
the following items, and then turn the power on again.
• Is there blockage of the air passage aperture?
• Is the air filter dirty?
• Does the peripheral temperature exceed 40°C?
Description
100
Troubleshooting
020-001523-01 Rev. 1 (11-2018)
LIT MAN USR APS Series