2. To enable the advanced EDID extensions, select Enter.
Christie recommends enabling the advanced EDID extensions.
3. On the projector, select MENU > Configuration > Input Settings > EDID Window Mode.
4. Verify Auto Detect is selected.
5. If you need a specific frame rate, from the display panel, select MENU > Configuration >
Input Settings > EDID Timing.
6. Select the required EDID timing and select Enter.
60 Hz is the default EDID timing.
Adjusting lamp power
Change the power of the lamp.
1. Select MENU > Configuration > Lamp > Lamp Power.
2. Select Enter.
3. To adjust the lamp power, use the slider.
4. To confirm your selection, select Enter.
BrightSelect
This feature allows users to select specific lamps to power on and off during projector operation.
Use the BrightSelect options to manage which lamp is on and off to control brightness levels.
Operating fewer than six lamps may extend the life of a set of six lamps by rotating the use of lamps.
To maintain original brightness if a lamp fails when operating fewer than six lamps, BrightSelect
automatically strikes one of the inactive lamps.
•
Limited power mode—Only one lamp can be selected.
•
Full power mode—Between one to six lamps can be selected.
Selecting lamps using BrightSelect
Use BrightSelect to determine which lamps are on and off during projector operation.
1. Select Menu > Configuration > Lamp > BrightSelect.
2. Select the lamps to activate.
In limited power mode only one lamp can be activated.
3. To set the system to automatically turn on a deselected lamp if one of the selected ones fails
to maintain the required level of brightness, select Enable automatic lamp redundancy.
4. Select Apply.
Enabling Camera Friendly Color mode
Some digital camera equipment presents the images generated by Christie laser products with a
noticeable red shift. These images do not represent how human vision perceives the projected image
Boxer 4K User Guide–Boxer 4K20 (Bb.4) and Boxer 4K30 (Bb.1)
020-101777-16 Rev. 1 (05-2023)
Copyright
©
2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
™
Configuring system settings
™
39