Safety Warnings And Guidelines; General Precautions; Ac/Power Precautions; Lamp Precautions - Christie Mirage M Series User Manual

High resolution video/graphics three chip 1080p hd, sxga+, and wuxga projectors.
Hide thumbs Also See for Mirage M Series:
Table of Contents

Advertisement

Safety warnings and guidelines

General Precautions

Danger! Failure to comply with the following results in death or serious injury.
• FIRE HAZARD. Keep hands, clothes and all combustible material away from the concentrated light
beam of the projector. Position all cables where they cannot contact hot surfaces or be pulled or
tripped over.
Warning! Failure to comply with the following could result in death or serious injury.
• All installation and maintenance procedures must be performed by a Christie qualified technician.
• Projector must be operated in an environment that meets operating specifications.

AC/power precautions

Warning! Failure to comply with the following could result in death or serious injury.
• Use only the AC power cord supplied. Do not attempt operation if the AC supply and cord are not
within the specified voltage and power range. See the license label on the back of the projector for
rated voltage and power.
• The projector is equipped with a three-wire plug with a grounding pin. This is a safety feature. If
you are unable to insert the plug into the outlet, contact an electrician to have the outlet replaced.
Never defeat the safety purpose of the grounding-type plug.
• Do not allow anything to rest on the power cord. Locate the power cord where persons walking on
it or objects rolling over it cannot damage the cord.

Lamp precautions

Warning! Failure to comply with the following could result in death or serious injury.
• Never attempt to access the lamp while the lamp is on. After turning the lamp off, it is crucial that
you wait at least 10 minutes before handling the lamp. This provides sufficient time for the lamp
cooling fans to properly cool the lamp.

Product documentation

For installation, setup, and user information, see the product documentation available on the
Christie website. Read all instructions before using or servicing this product.
1. Access the documentation from the Christie website:
Go to this URL: bit.ly/2C6H4HZ or https://www.christiedigital.com/en-us/business/
products/projectors/3-chip-dlp/3d-projectors.
Mirage M Series User Manual
020-101942-02 Rev. 1 (10-2018)
http://www.pureglare.com.au
Introduction
14

Advertisement

Table of Contents
loading

Table of Contents