1. Network Function
1.6 Other Functions
1.6.1 E-mail Alerts
The projector can automatically send an alert message to the specified using
addresses when the projector detects a certain condition requiring maintenance
or detected an error. (&89)
1.6.2 Projector Management using SNMP
The SNMP (Simple Network Management Protocol) manages the projector
information, which is a failure or warning status, from the computer on the
network. The SNMP management software is required on the computer to use
this function. (&92)
1.6.3 Event Scheduling
The scheduling function sets up scheduled events including
power on / power off. It allows the projector to be self-managing.
The schedule can be set in Projector Web Control or OPTION-SCHEDULE menu
in the projector. (&94)
1.6.4 Command Control via the Network
You can configure and control the projector using the network using RS-232C
commands. (&97)
LWU720i/LHD720i/LWU620i
User's Manual - Network Guide
10
020-001293-01 Rev. 1 (10-2017)