1.6 Other Functions
1.6.1 Email Alerts
The projector can automatically send an alert message to the specified email
addresses when the projector detects a certain condition requiring maintenance
or detected an error. (&89)
1.6.2 Projector Management using SNMP
The SNMP (Simple Network Management Protocol) enables to manage the
projector information, which is a failure or warning status, from the computer on
the network. The SNMP management software will be required on the computer
to use this function. (&92)
1.6.3 Event Scheduling
The scheduling function enables to setup scheduled events including
power on / power off. It enables to be "self-management" projector.
The schedule can be set in Projector Web Control or OPTION-SCHEDULE menu
in the projector. (&94)
1.6.4 Command Control via the Network
You can configure and control the projector via the network using RS-232C
commands. (&98)
LWU650-APS/LWU530-APS
User's Manual - Network Guide
11
1. Network Function
020-001538-01 Rev. 1 (11-2018)
LIT GUID SET APS Series NET